iq.ul.com
CLICK TO CONTINUEView additional material information including performance and processing data The information presented on the UL Prospector datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Component - PlasticsE47960
Guide Information
DSM Engineering Plastics B V
Urmonderbaan 22, Geleen 6167 RD NL
TV4 261 SF(h3)
Polybutylene Terephthalate (PBT), glass reinforced, flame retardant, high flow "Arnite", furnished as pellets

Color
Min. Thk
(mm)
Flame
Class

HWI

HAI
RTI
Elec
RTI
Imp
RTI
Str
NC, BK0.4V-240130--
ALL0.75V-030140150140
1.5V-030140150140
3.0V-020140150140
Comparative Tracking Index (CTI):2Inclined Plane Tracking (IPT) kV:-
Dielectric Strength (kV/mm):34Volume Resistivity (10x ohm-cm):15
High-Voltage Arc Tracking Rate (HVTR):4High Volt, Low Current Arc Resis (D495):5
Dimensional Stability (%):-
(h3) - Virgin and regrind up to 50% by weight inclusive, have the same basic material characteristics in the 0.75 mm thickness and greater, and with respect to Flammability in the 0.4 mm thickness and greater.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:2001-09-20© 2019 UL LLC
Last Revised:2018-09-05

IEC and ISO Test Methods
Test NameTest MethodUnitsThk (mm)Value
FlammabilityIEC 60695-11-10Class (color)0.4V-2 (NC, BK)
0.75V-0 (ALL)
1.5V-0 (ALL)
3.0V-0 (ALL)
Glow-Wire Flammability (GWFI)IEC 60695-2-12°C--
Glow-Wire Ignition (GWIT)IEC 60695-2-13°C--
IEC Comparative Tracking IndexIEC 60112Volts (Max)--
IEC Ball PressureIEC 60695-10-2°C-210
ISO Heat Deflection (1.80 MPa)ISO 75-2°C4.0209
ISO Tensile StrengthISO 527-2MPa--
ISO Flexural StrengthISO 178MPa--
ISO Tensile ImpactISO 8256kJ/m2--
ISO Izod ImpactISO 180kJ/m2--
ISO Charpy ImpactISO 179-2kJ/m2--