UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10326
                        
                            Issued:1997-09-10
                    
                            Revised:2012-04-19
                    
                            Style
                            10326
                        
                            Single conductor with extruded insulation.
                    
			Rating200 deg C, 150 Vac, Horizontal flame.
		
			Conductor40 AWG - 6 AWG, solid or stranded. Solid magnet or litz cable magnet wire, R/C (OBMW2) magnet wire rated 125 deg C. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor. AWG size to be determined by the Resistance Test.
		
			InsulationExtruded PFA. May extrude PFA in two or three layers.
		
			Conductor size (AWG)Minimum average thickness (inches)Minimum thickness at any point (inches)
		
			40-200.00550.005
		
			19-150.0080.007
		
			14-100.0130.012
		
			9-60.0200.018
		
			ShieldOptional.
		
			BraidOptional. Silicone impregnated glass braid, 0.015 inches thick.
		
			CoveringOptional. Extruded FEP, extruded PFA, extruded PTFE or non-extruded PTFE tape wrapped, 0.005 inches or heavier thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring where not subject to movement or mechanical damage. May also be used for further processing in cables and lead wire for UL 1950 applications. Tags may indicate the following: "300 Volts Peak for Electronic Use Only".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10326	Issued:1997-09-10
			Revised:2012-04-19


Rating	200 deg C, 150 Vac, Horizontal flame.

Conductor	40 AWG - 6 AWG, solid or stranded. Solid magnet or litz cable magnet wire, R/C (OBMW2) magnet wire rated 125 deg C. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor. AWG size to be determined by the Resistance Test.

Insulation	Extruded PFA. May extrude PFA in two or three layers.
	Conductor size (AWG)	Minimum average thickness (inches)	Minimum thickness at any point (inches)
	40-20	0.0055	0.005
	19-15	0.008	0.007
	14-10	0.013	0.012
	9-6	0.020	0.018

Shield	Optional.

Braid	Optional. Silicone impregnated glass braid, 0.015 inches thick.

Covering	Optional. Extruded FEP, extruded PFA, extruded PTFE or non-extruded PTFE tape wrapped, 0.005 inches or heavier thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring where not subject to movement or mechanical damage. May also be used for further processing in cables and lead wire for UL 1950 applications. Tags may indicate the following: "300 Volts Peak for Electronic Use Only".