UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10491
                        
                            Issued:2000-05-25
                    
                            Revised:2011-08-02
                    
                            Style
                            10491
                        
                            Single conductor with extruded insulation.
                    
			Rating105 deg C, 300 Vac, Horizontal flame, 60 or 80 deg C Oil. Optional - Gasoline Resistant.
		
			Conductor40 - 6 AWG, solid or stranded, or Litz cable magnet wire, R/C (OBMW2) magnet wire.  AWG size to be determined by the Resistance Test.
		
			InsulationExtruded FEP or PFA
		
			40-20 AWG conductor size5.5 mils min average5 mils min at any point
		
			19-15 AWG87
		
			14-10 AWG1312
		
			9-6 AWG2018
		
			Tinned copper may be employed when FEP insulation is used. May extrude FEP in two or three layers.
		
			AssemblyEach single magnet wire strand is cabled together other magnet wire strands to form a conductor.
		
			ShieldOptional.
		
			CoveringOptional. Extruded TFE, FEP, or PFA, 5 mils or heavier; or PTFE (extruded or tape wrapped), 5 mils or heavier.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment, such as electronic computers and business machines, where not subjected to movement or mechanical damage. May also be used for further processing in cables and lead wire for UL 1950 applications.Tags may indicate the following:"Suitable for immersion in gasoline; gasoline vapor; and 60 deg C or 80 deg C in oil".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10491	Issued:2000-05-25
			Revised:2011-08-02


Rating	105 deg C, 300 Vac, Horizontal flame, 60 or 80 deg C Oil. Optional - Gasoline Resistant.

Conductor	40 - 6 AWG, solid or stranded, or Litz cable magnet wire, R/C (OBMW2) magnet wire. AWG size to be determined by the Resistance Test.

Insulation	Extruded FEP or PFA
	40-20 AWG conductor size	5.5 mils min average	5 mils min at any point
	19-15 AWG	8	7
	14-10 AWG	13	12
	9-6 AWG	20	18
	Tinned copper may be employed when FEP insulation is used. May extrude FEP in two or three layers.

Assembly	Each single magnet wire strand is cabled together other magnet wire strands to form a conductor.

Shield	Optional.

Covering	Optional. Extruded TFE, FEP, or PFA, 5 mils or heavier; or PTFE (extruded or tape wrapped), 5 mils or heavier.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment, such as electronic computers and business machines, where not subjected to movement or mechanical damage. May also be used for further processing in cables and lead wire for UL 1950 applications.Tags may indicate the following:"Suitable for immersion in gasoline; gasoline vapor; and 60 deg C or 80 deg C in oil".