UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20012
                        
                            Issued:1969-06-19
                    
                            Revised:2012-12-12
                    
                            Style
                            20012
                        
                            Flat Ribbon Cable
                    
			Rating80 deg C, 150 Vac, Horizontal flame.
		
			Assembly2 to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals from 2 to 100 in. apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min. 1 inch width of PVC bands, approx 3/16 in. Manufacturer shall maintain a record of all singles used in each cable.
		
			Conductor32 AWG - 16 AWG solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances, electroniccomputers or business equipment. Tabs may indicate the following 300 Volts Peak - For Electronic Use only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20012	Issued:1969-06-19
			Revised:2012-12-12


Rating	80 deg C, 150 Vac, Horizontal flame.

Assembly	2 to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals from 2 to 100 in. apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min. 1 inch width of PVC bands, approx 3/16 in. Manufacturer shall maintain a record of all singles used in each cable.

Conductor	32 AWG - 16 AWG solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances, electroniccomputers or business equipment. Tabs may indicate the following 300 Volts Peak - For Electronic Use only.