UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20084
                        
                            Issued:1980-08-18
                    
                            Revised:2012-03-07
                    
                            Style
                            20084
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, voltage not specified, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.  A 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			* Dia of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less45 mils36 mils
		
			0.701 - 1.500 inch60 mils48 mils
		
			*major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment (such as a TV camera).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20084	Issued:1980-08-18
			Revised:2012-03-07


Rating	60 deg C, voltage not specified, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. A 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded TPU
	* Dia of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	45 mils	36 mils
	0.701 - 1.500 inch	60 mils	48 mils
	*major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment (such as a TV camera).