UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20261
                        
                            Issued:1983-04-18
                    
                            Revised:2012-01-12
                    
                            Style
                            20261
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min. Material not specified.
		
			InsulationFEP or PE or XLPE, 2 mils min average, 2 mils min at any point, 100 mils max, solid or cellular. Irradiation optional. Barrier layer and/or fillers optional.
		
			AssemblyTwo through ten conductors
		
			ShieldOptional.
		
			Covering2 mils min at any point, extruded PVC, Polyamide, (Optional) or Polyester or lacquered braid.
		
			JacketPOLYAMIDE or POLYESTER or PVC, 2 mils min average - Optional, same as covering.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20261	Issued:1983-04-18
			Revised:2012-01-12


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min. Material not specified.

Insulation	FEP or PE or XLPE, 2 mils min average, 2 mils min at any point, 100 mils max, solid or cellular. Irradiation optional. Barrier layer and/or fillers optional.

Assembly	Two through ten conductors

Shield	Optional.

Covering	2 mils min at any point, extruded PVC, Polyamide, (Optional) or Polyester or lacquered braid.

Jacket	POLYAMIDE or POLYESTER or PVC, 2 mils min average - Optional, same as covering.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.