UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20368
                        
                            Issued:1985-01-25
                    
                            Revised:2019-11-07
                    
                            Style
                            20368
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating200 deg C, 300 Vac, Cable flame, Optional - 80 deg C Oil.
		
			InsulationLabeled or complying with manufacturer's AWM procedure and having a minimum rating of 200 deg C and 300 volts.  The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			ShieldOptional.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			JacketExtruded FEP
		
			dia of the cable under jacket in inches
		
			0.425 or less25 mils min average20 mils minimum at any point
		
			0.426-0.700 dia30 avg24 min
		
			0.701-1.500 dia45 avg36 min
		
			1.501-2.500 dia60 avg48 min
		
			2.501 dia and larger80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: Suitable for immersion in oil at 80 deg C, or 600 volts peak - For Electronic Use Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20368	Issued:1985-01-25
			Revised:2019-11-07


Rating	200 deg C, 300 Vac, Cable flame, Optional - 80 deg C Oil.

Insulation	Labeled or complying with manufacturer's AWM procedure and having a minimum rating of 200 deg C and 300 volts. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Shield	Optional.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Jacket	Extruded FEP
	dia of the cable under jacket in inches
	0.425 or less	25 mils min average	20 mils minimum at any point
	0.426-0.700 dia	30 avg	24 min
	0.701-1.500 dia	45 avg	36 min
	1.501-2.500 dia	60 avg	48 min
	2.501 dia and larger	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: Suitable for immersion in oil at 80 deg C, or 600 volts peak - For Electronic Use Only.