UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20370
                        
                            Issued:1985-01-25
                    
                            Revised:2012-12-12
                    
                            Style
                            20370
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating200 deg C, no voltage assigned, Cable flame. Optional - 80 deg C Oil.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon (polyamide); oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded FEP.
		
			Diameter of the cable under jacketMinimum average thickenssMinimum thickness at any point
		
			0.425 inch or less25 mils20 mils
		
			0.426-0.700 inch30 mils24 mils
		
			0.701-1.500 mils45 mils36 mils
		
			1.501-2.500 mils60 mils48 mils
		
			2.501 inch and larger80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20370	Issued:1985-01-25
			Revised:2012-12-12


Rating	200 deg C, no voltage assigned, Cable flame. Optional - 80 deg C Oil.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon (polyamide); oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded FEP.
	Diameter of the cable under jacket	Minimum average thickenss	Minimum thickness at any point
	0.425 inch or less	25 mils	20 mils
	0.426-0.700 inch	30 mils	24 mils
	0.701-1.500 mils	45 mils	36 mils
	1.501-2.500 mils	60 mils	48 mils
	2.501 inch and larger	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring.