UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20855
                        
                            Issued:1994-07-21
                    
                            Revised:2011-12-02
                    
                            Style
                            20855
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedurehaving a minimum rating of 80 deg. C, 30 Vac.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketFRPE.
		
			@Dia. under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			1.501 - 2.5008064
		
			2.501 - 4.00011088
		
			4.001 or larger140112
		
			@ - Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment, Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20855	Issued:1994-07-21
			Revised:2011-12-02


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacturer's AWM Procedurehaving a minimum rating of 80 deg. C, 30 Vac.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	FRPE.
	@Dia. under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48
	1.501 - 2.500	80	64
	2.501 - 4.000	110	88
	4.001 or larger	140	112
	@ - Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment, Class 2 circuits only.