UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2129
                        
                            Issued:1959-05-01
                    
                            Revised:2019-11-06
                    
                            Style
                            2129
                        
                            Multi-conductor cable using Extruded Non-integral Jacket.
                    
			Rating60, 80, 90, or 105 deg C; 600 or 1000 Vac, Horizontal flame.
		
			Conductor28 AWG - 9 AWG solid or stranded round.
		
			InsulationExtruded PVC, 30 mils min average, 27 mils minimum at any point or Labled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles twisted together, or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			JacketExtruded PVC
		
			Dia. of cable under jacket in inches
		
			0.700 or less*30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-4.500 dia80 avg64 min
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2129	Issued:1959-05-01
			Revised:2019-11-06


Rating	60, 80, 90, or 105 deg C; 600 or 1000 Vac, Horizontal flame.

Conductor	28 AWG - 9 AWG solid or stranded round.

Insulation	Extruded PVC, 30 mils min average, 27 mils minimum at any point or Labled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs or groups of twisted singles twisted together, or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Jacket	Extruded PVC
	Dia. of cable under jacket in inches
	0.700 or less*	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-4.500 dia	80 avg	64 min
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.