UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21474
                        
                            Issued:2005-12-20
                    
                            Revised:2011-08-29
                    
                            Style
                            21474
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated conductors.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded mPPE-PE.  For rippable construction, jacket thickness shall be measured after ripping.
		
			@ Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.424 inch or less30 mils24 mils
		
			0.425-0.700 inch60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			@ Equivalent diameter of flat assembly = 1.1284 x (TW)^0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21474	Issued:2005-12-20
			Revised:2011-08-29


Rating	60 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated conductors.

Covering	Optional.

Shield	Optional.

Jacket	Extruded mPPE-PE. For rippable construction, jacket thickness shall be measured after ripping.
	@ Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.424 inch or less	30 mils	24 mils
	0.425-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils

	@ Equivalent diameter of flat assembly = 1.1284 x (TW)^0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.