UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21570
                        
                            Issued:2007-08-13
                    
                            Revised:2011-09-26
                    
                            Style
                            21570
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C, 150 Vac, horizontal flame, cable flame.
		
			ConductorStranded, 18, 16, 14, 12 or 10 AWG.  Stranding same as for SPT-3 in UL 62.
		
			InsulationExtruded PVC. 18 and 16 AWG, 45 mils min average, 40 mils minimum at any point; 14 AWG, 65 mils min average, 58 mils minimum at any point; 12 AWG, 80 mils min average, 72 mils minimum at any point; 10 AWG, 95 mils min average, 85 mils minimum at any point.
		
			AssemblyTwo insulated circuit conductors and one insulated grounding conductor laid parallel. The grounding conductor shall have green or green/yellow insulation of 15 mils minimum average thickness and 13 mils minimum thickness at any point.  The grounding conductor shall be centrally located.
		
			ShieldAluminum foil with 100 percent coverage over the insulated circuit conductors, and a braided shield composed of 36 - 34 AWG copper wires and with 30 percent minimum coverage over the foil.
		
			JacketExtruded PVC, 25 mils min average, 20 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external wiring installed where Type SPT-3 is required in LCDI's and the final acceptance of the component is dependent on its installation and use in or with complete equipment submitted to Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21570	Issued:2007-08-13
			Revised:2011-09-26


Rating	105 deg C, 150 Vac, horizontal flame, cable flame.

Conductor	Stranded, 18, 16, 14, 12 or 10 AWG. Stranding same as for SPT-3 in UL 62.

Insulation	Extruded PVC. 18 and 16 AWG, 45 mils min average, 40 mils minimum at any point; 14 AWG, 65 mils min average, 58 mils minimum at any point; 12 AWG, 80 mils min average, 72 mils minimum at any point; 10 AWG, 95 mils min average, 85 mils minimum at any point.

Assembly	Two insulated circuit conductors and one insulated grounding conductor laid parallel. The grounding conductor shall have green or green/yellow insulation of 15 mils minimum average thickness and 13 mils minimum thickness at any point. The grounding conductor shall be centrally located.

Shield	Aluminum foil with 100 percent coverage over the insulated circuit conductors, and a braided shield composed of 36 - 34 AWG copper wires and with 30 percent minimum coverage over the foil.

Jacket	Extruded PVC, 25 mils min average, 20 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external wiring installed where Type SPT-3 is required in LCDI's and the final acceptance of the component is dependent on its installation and use in or with complete equipment submitted to Underwriters Laboratories Inc.