UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2335
                        
                            Issued:1961-09-15
                    
                            Revised:2012-03-12
                    
                            Style
                            2335
                        
                            Multiple-conductor using non-integral jacket.
                    
			Rating80 deg C,Voltage not specified, Horizontal flame.
		
			Conductor32 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PVC, 8 mils min average, 6 mils minimum at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Dia. of cable under jacket in inchesAverage thickness in milsMinimum thickness at any point in mils
		
			0.350 or less1512
		
			0.351-0.7003024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2335	Issued:1961-09-15
			Revised:2012-03-12


Rating	80 deg C,Voltage not specified, Horizontal flame.

Conductor	32 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PVC, 8 mils min average, 6 mils minimum at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, a 6 mils or heavier, may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Dia. of cable under jacket in inches	Average thickness in mils	Minimum thickness at any point in mils
	0.350 or less	15	12
	0.351-0.700	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.