UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2386
                        
                            Issued:1964-03-24
                    
                            Revised:2012-11-05
                    
                            Style
                            2386
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Horozontal flame, Cable flame.
		
			Insulated Conductor40 AWG minimum. Labeled or complying with Manuacturer's AWM Procedure.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC, 6 mils minimum thickness. May be extruded over one or more groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket@Minimum average thicknessMinimum thickness at any point
		
			0.701-1.500 inch80 mils64 mils
		
			@ - Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection in Class 2 circuits of computers and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2386	Issued:1964-03-24
			Revised:2012-11-05


Rating	60 deg C, 30 Vac, Horozontal flame, Cable flame.

Insulated Conductor	40 AWG minimum. Labeled or complying with Manuacturer's AWM Procedure.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, 6 mils minimum thickness. May be extruded over one or more groups of conductors.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket@	Minimum average thickness	Minimum thickness at any point
	0.701-1.500 inch	80 mils	64 mils
	@ - Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection in Class 2 circuits of computers and electronic equipment.