UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2517
                        
                            Issued:1970-10-21
                    
                            Revised:2018-04-24
                    
                            Style
                            2517
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 300 Vac, Cable Flame.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure. 40 AWG minimum.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of Core Assembly under Jacket@Minimum Average ThicknessMinimum Thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 - 1.000 inch45 mils36 mils
		
			1.001 - 1.500 inch60 mils48 mils
		
			1.501 - 2.500 inch80 mils64 mils
		
			@ - Major diameter if cable is flat or oval.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment or internal wiring of electronic equipment or appliances. Tags may also indicate the following: "600 Volts peak for Electronic Use Only".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2517	Issued:1970-10-21
			Revised:2018-04-24


Rating	105 deg C, 300 Vac, Cable Flame.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure. 40 AWG minimum.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of Core Assembly under Jacket@	Minimum Average Thickness	Minimum Thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 - 1.000 inch	45 mils	36 mils
	1.001 - 1.500 inch	60 mils	48 mils
	1.501 - 2.500 inch	80 mils	64 mils
	@ - Major diameter if cable is flat or oval.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment or internal wiring of electronic equipment or appliances. Tags may also indicate the following: "600 Volts peak for Electronic Use Only".