UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2748
                        
                            Issued:1975-09-04
                    
                            Revised:2019-11-06
                    
                            Style
                            2748
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Horizontal flame, Oil Resistant 80 deg C (optional).
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded FEP;
		
			cable dia in inches
		
			0.425 or less20 mils minimum average thickness18 mils minimum thickness at any point
		
			0.426-0.700 dia30 avg26 min
		
			0.701-1.500 dia45 avg40 min
		
			1.501-2.500 dia60 avg. 55 min
		
			2.501 dia and larger90 avg82 min.
		
			- Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring. The tag may also indicate 2500 volts peak - For Electronic Use Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2748	Issued:1975-09-04
			Revised:2019-11-06


Rating	150 deg C, 600 Vac, Horizontal flame, Oil Resistant 80 deg C (optional).

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded FEP;
	cable dia in inches
	0.425 or less	20 mils minimum average thickness	18 mils minimum thickness at any point
	0.426-0.700 dia	30 avg	26 min
	0.701-1.500 dia	45 avg	40 min
	1.501-2.500 dia	60 avg. 55 min
	2.501 dia and larger	90 avg	82 min.

	- Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring. The tag may also indicate 2500 volts peak - For Electronic Use Only.