UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2749
                        
                            Issued:1975-09-04
                    
                            Revised:2011-10-10
                    
                            Style
                            2749
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating200 deg C, 300 Vac, Horizontal flame, 80 deg C Oil.  Optional - Oil Resistant.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; PET; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketFEP
		
			Dia of cable under jacket in inchesMinimum average thickness in milsMinimum thickness at any point in mils
		
			0.425 or less2018
		
			0.426-0.7003026
		
			0.701-1.5004540
		
			1.501-2.5006055
		
			2.501 and larger9082
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2749	Issued:1975-09-04
			Revised:2011-10-10


Rating	200 deg C, 300 Vac, Horizontal flame, 80 deg C Oil. Optional - Oil Resistant.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; PET; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.

Shield	Optional.

Jacket	FEP
	Dia of cable under jacket in inches	Minimum average thickness in mils	Minimum thickness at any point in mils
	0.425 or less	20	18
	0.426-0.700	30	26
	0.701-1.500	45	40
	1.501-2.500	60	55
	2.501 and larger	90	82

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment.