UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2754
                        
                            Issued:1975-11-24
                    
                            Revised:2011-10-14
                    
                            Style
                            2754
                        
                            Multiple-conductor cable with non-integral jacket
                    
			Rating80 deg C, voltage not specified, Horizontal Flame, Cable Flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedures. May use same or mixed AWG size.
		
			AssemblyConsists of two or more insulated conductors, twisted pairs or groups of twisted insulated conductors twisted together. The insulated conductors or groups of insulated conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional - Extruded PVC.
		
			Inner ShieldOptional.
		
			Center ShieldOptional.
		
			Outer ShieldOptional.
		
			Outer ShieldOptional.
		
			PVCExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 or less15 mils12 mils
		
			0.251-0.425 inch30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or test probe leads for electronic testing and measuring equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2754	Issued:1975-11-24
			Revised:2011-10-14


Rating	80 deg C, voltage not specified, Horizontal Flame, Cable Flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedures. May use same or mixed AWG size.

Assembly	Consists of two or more insulated conductors, twisted pairs or groups of twisted insulated conductors twisted together. The insulated conductors or groups of insulated conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional - Extruded PVC.

Inner Shield	Optional.

Center Shield	Optional.

Outer Shield	Optional.

Outer Shield	Optional.

PVC	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 or less	15 mils	12 mils
	0.251-0.425 inch	30 mils	24 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or test probe leads for electronic testing and measuring equipment.