UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2842
                        
                            Issued:1976-12-27
                    
                            Revised:2012-02-24
                    
                            Style
                            2842
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Insulated Conductor40 AWG minimum - Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 80 deg C.

			AssemblyTwo or more twisted singles or groups of twisted singles cabled together to form a flat or round cable with no more than three rows of single conductors or groups of conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete  description of each assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			1.0 inch or less45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch or larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection in Class 2 circuits of	Electronic Equipment where each end is terminated in connectors.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2842	Issued:1976-12-27
			Revised:2012-02-24


Rating	80 deg C, 30 Vac, Cable flame.

Insulated Conductor	40 AWG minimum - Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 80 deg C.

Assembly	Two or more twisted singles or groups of twisted singles cabled together to form a flat or round cable with no more than three rows of single conductors or groups of conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	1.0 inch or less	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch or larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection in Class 2 circuits of Electronic Equipment where each end is terminated in connectors.