UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10020
                        
                            Issued:1988-05-17
                    
                            Revised:2012-07-20
                    
                            Style
                            10020
                        
                            Single Conductor with Extruded or Non-Extruded Insulation
                    
			Rating90 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40-20 AWG, Solid or Stranded Round. Material not specified.
		
			InsulationExtruded PTFE, Extruded PFA or Extruded FEP, 3.5 mils minimum average, 3.0 mils minimum at any point; or extruded foamed PFA or extruded foamed FEP, 4 mils minimum average, 3.5 mils minimum at any point; or tape wrapped Non-Extruded PTFE, 3.5 mils minimum average, 3.0 mils minimum at any point; or tape wrapped foamed Non-Extruded PTFE, 4.0 mils minimum average, 3.5 mils minimum at any point. Tape wrap may be one or more layers minimum 30 percent overlap of at least one layer.
		
			AssemblyInsulated conductor with optional inner covering, optional inner shield, optional outer covering, optional outer shield and optional jacket.
		
			Inner CoveringOptional 
(1) Extruded PTFE, Extruded PFA, Extruded FEP, Extruded ETFE, or tape wrapped Non-Extruded PTFE, 1 mil minimum at any point, or 
(2) Tape wrapped Non-Extruded "Milene" (polyester or PVC adhesives on PET) 0.2 mil minimum at any point.
		
			Inner ShieldOptional.
		
			Outer CoveringOptional 
(1) Extruded PTFE, Extruded PFA, Extruded FEP, Extruded ETFE, or tape wrapped Non-Extruded PTFE, 1 mil minimum at any point, or 
(2) Tape wrapped Non-Extruded "Milene" (polyester or PVC adhesives on PET) 0.2 mil minimum at any point.
		
			Outer ShieldOptional.
		
			JacketOptional
(1) Extruded PTFE, Extruded PFA, Extruded FEP, Extruded ETFE, Extruded PVC 1.5 mils minimum thickness, or
(2) Tape wrapped Non-Extruded PTFE 1 mil minimum thickness, or
(3) Tape wrapped Non-Extruded "Milene" 0.2 mil minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electrical equipment or as insulated single in jacketed multiconductor cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10020	Issued:1988-05-17
			Revised:2012-07-20


Rating	90 deg C, 30 Vac, Horizontal Flame.

Conductor	40-20 AWG, Solid or Stranded Round. Material not specified.

Insulation	Extruded PTFE, Extruded PFA or Extruded FEP, 3.5 mils minimum average, 3.0 mils minimum at any point; or extruded foamed PFA or extruded foamed FEP, 4 mils minimum average, 3.5 mils minimum at any point; or tape wrapped Non-Extruded PTFE, 3.5 mils minimum average, 3.0 mils minimum at any point; or tape wrapped foamed Non-Extruded PTFE, 4.0 mils minimum average, 3.5 mils minimum at any point. Tape wrap may be one or more layers minimum 30 percent overlap of at least one layer.

Assembly	Insulated conductor with optional inner covering, optional inner shield, optional outer covering, optional outer shield and optional jacket.

Inner Covering	Optional (1) Extruded PTFE, Extruded PFA, Extruded FEP, Extruded ETFE, or tape wrapped Non-Extruded PTFE, 1 mil minimum at any point, or (2) Tape wrapped Non-Extruded "Milene" (polyester or PVC adhesives on PET) 0.2 mil minimum at any point.

Inner Shield	Optional.

Outer Covering	Optional (1) Extruded PTFE, Extruded PFA, Extruded FEP, Extruded ETFE, or tape wrapped Non-Extruded PTFE, 1 mil minimum at any point, or (2) Tape wrapped Non-Extruded "Milene" (polyester or PVC adhesives on PET) 0.2 mil minimum at any point.

Outer Shield	Optional.

Jacket	Optional (1) Extruded PTFE, Extruded PFA, Extruded FEP, Extruded ETFE, Extruded PVC 1.5 mils minimum thickness, or (2) Tape wrapped Non-Extruded PTFE 1 mil minimum thickness, or (3) Tape wrapped Non-Extruded "Milene" 0.2 mil minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electrical equipment or as insulated single in jacketed multiconductor cables.