UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10033
                        
                            Issued:1988-11-09
                    
                            Revised:2013-02-07
                    
                            Style
                            10033
                        
                            Single conductor with extruded insulation
                    
			Rating105 deg C, 600 Vac, Horizontal flame, 75 deg C Wet.
		
			ConductorResistance wire. (Size depends upon wattage demand).
		
			InsulationExtruded ETFE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			CoveringOptional. Extruded Nylon, 5 mils minimum thickness at any point.
		
			Sensor WireOptional. Uninsulated copper or copper alloy conductor applied as serve wrap or braid, 33 AWG or smaller strands, minimum coverage 80%.
		
			CoveringExtruded Nylon, 10 mils minimum thickness at any point.
		
			JacketOptional. Extruded PVC, 45 mils minimum average thickness, 36 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10033	Issued:1988-11-09
			Revised:2013-02-07


Rating	105 deg C, 600 Vac, Horizontal flame, 75 deg C Wet.

Conductor	Resistance wire. (Size depends upon wattage demand).

Insulation	Extruded ETFE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Covering	Optional. Extruded Nylon, 5 mils minimum thickness at any point.

Sensor Wire	Optional. Uninsulated copper or copper alloy conductor applied as serve wrap or braid, 33 AWG or smaller strands, minimum coverage 80%.

Covering	Extruded Nylon, 10 mils minimum thickness at any point.

Jacket	Optional. Extruded PVC, 45 mils minimum average thickness, 36 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.