UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10081
                        
                            Issued:1990-06-29
                    
                            Revised:2012-07-20
                    
                            Style
                            10081
                        
                            Single Conductor using Non-Integral Extruded Jacket
                    
			Rating105 deg C, 30 Vac, VW-1 Flame.
		
			Conductor40 AWG minimum, Solid or Stranded Round, material not specified.
		
			InsulationSolid or Foamed, Extruded PE or Extruded XLPE or Extruded FRPE or Extruded XLFRPE, 4 mils minimum at any point.
		
			AssemblyInsulated conductor with optional inner covering, optional inner shield, jacket, optional outer shield and optioal outer covering.
		
			Inner CoveringOptional - 2 mils minimum at any point Extruded PVC, Extruded Nylon, Extruded Polyester, Extruded PVDF, Extruded ETFE, Extruded XLPE or Extruded XLFRPE, or Non-Extruded lacquered braids.
		
			Inner ShieldOptional.
		
			JacketExtruded PVC, 5 mils minimum average, 3 mils minimum at any point.
		
			Outer ShieldOptional.
		
			Outer CoveringOptional - Extruded PVC, 5 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseWiring of low energy non-hazardous circuits in audio and video equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10081	Issued:1990-06-29
			Revised:2012-07-20


Rating	105 deg C, 30 Vac, VW-1 Flame.

Conductor	40 AWG minimum, Solid or Stranded Round, material not specified.

Insulation	Solid or Foamed, Extruded PE or Extruded XLPE or Extruded FRPE or Extruded XLFRPE, 4 mils minimum at any point.

Assembly	Insulated conductor with optional inner covering, optional inner shield, jacket, optional outer shield and optioal outer covering.

Inner Covering	Optional - 2 mils minimum at any point Extruded PVC, Extruded Nylon, Extruded Polyester, Extruded PVDF, Extruded ETFE, Extruded XLPE or Extruded XLFRPE, or Non-Extruded lacquered braids.

Inner Shield	Optional.

Jacket	Extruded PVC, 5 mils minimum average, 3 mils minimum at any point.

Outer Shield	Optional.

Outer Covering	Optional - Extruded PVC, 5 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Wiring of low energy non-hazardous circuits in audio and video equipment.