UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10103
                        
                            Issued:1991-08-14
                    
                            Revised:2012-07-13
                    
                            Style
                            10103
                        
                            Single conductor with extruded insulation
                    
			Rating80 deg C, 125 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, tinned or bare copper or solid untinned copper clad steel.
		
			InsulationPE, Inner layer - Cellular polyethylene. Outer layer - Solid polyethylene. Composite thickness 15 mils minimum, average thickness, 13 mils minimum thickness at any point, 100 mils maximum average thickness. (Two layers are non-separable). May be irradiated.
		
			AssemblyInsulated conductor with optional inner shield, optional inner covering, optional outer shield and optional outer covering.
		
			ShieldEither Inner shield or outer shield must be present.
		
			CoveringEither Inner covering or outer covering must be present. Extruded PVC, minimum average thickness 10 mils, minimum thickness at any point 8 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10103	Issued:1991-08-14
			Revised:2012-07-13


Rating	80 deg C, 125 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG solid or stranded round, tinned or bare copper or solid untinned copper clad steel.

Insulation	PE, Inner layer - Cellular polyethylene. Outer layer - Solid polyethylene. Composite thickness 15 mils minimum, average thickness, 13 mils minimum thickness at any point, 100 mils maximum average thickness. (Two layers are non-separable). May be irradiated.

Assembly	Insulated conductor with optional inner shield, optional inner covering, optional outer shield and optional outer covering.

Shield	Either Inner shield or outer shield must be present.

Covering	Either Inner covering or outer covering must be present. Extruded PVC, minimum average thickness 10 mils, minimum thickness at any point 8 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electronic Equipment.