UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10120
                        
                            Issued:1992-01-29
                    
                            Revised:2017-09-07
                    
                            Style
                            10120
                        
                            Single-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating60 deg C, 300 Vac, Cable flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded FRPE or PE, 23 mils minimum average thickness, 20 mils minimum thickness at any point.
		
			ShieldInner and outer shield are optional.
		
			CoveringInner - (Optional) Extruded PVC, Nylon or Polyester, 2 mils minimum thickness, or lacquered braid. Outer -(Optional) Extruded PVC 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			BraidOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches) ¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10120	Issued:1992-01-29
			Revised:2017-09-07


Rating	60 deg C, 300 Vac, Cable flame.

Conductor	30 AWG - 16 AWG solid or stranded round, tinned or bare.

Insulation	Extruded FRPE or PE, 23 mils minimum average thickness, 20 mils minimum thickness at any point.

Shield	Inner and outer shield are optional.

Covering	Inner - (Optional) Extruded PVC, Nylon or Polyester, 2 mils minimum thickness, or lacquered braid. Outer -(Optional) Extruded PVC 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Braid	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches) ¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring of electronic equipment.