UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10168
                        
                            Issued:1993-06-18
                    
                            Revised:2012-07-13
                    
                            Style
                            10168
                        
                            Single conductor with extruded insulation
                    
			Rating80, 90, 105 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 10 AWG, solid or stranded.
		
			InsulationExtuded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyLitz cable conductor consists of single strand magnet wire, R/C (OBMW2) magnet wire. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor. AWG size to be determined by the DC Resistance Test per UL 1581.
		
			CoveringOptional - Extruded PVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring where not subjected to movement or mechanical abuse. Tag may also indicate the following: "600 Volts Peak for Electronic Use Only".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10168	Issued:1993-06-18
			Revised:2012-07-13


Rating	80, 90, 105 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 10 AWG, solid or stranded.

Insulation	Extuded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Litz cable conductor consists of single strand magnet wire, R/C (OBMW2) magnet wire. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor. AWG size to be determined by the DC Resistance Test per UL 1581.

Covering	Optional - Extruded PVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring where not subjected to movement or mechanical abuse. Tag may also indicate the following: "600 Volts Peak for Electronic Use Only".