UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10173
                        
                            Issued:1993-06-22
                    
                            Revised:2012-01-31
                    
                            Style
                            10173
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating200 deg C, 600 Vac, Horizontal Flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure. The designations of the style of the individual conductors used in making up the cable assembly shall be available.
		
			AssemblyFor conductor - A barrier layer, if employed, may be a fibrous assembly wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic tape wrap.
		
			ShieldOptional.
		
			JacketExtruded FEP. Dia. of cable 0.425 in. or less, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10173	Issued:1993-06-22
			Revised:2012-01-31


Rating	200 deg C, 600 Vac, Horizontal Flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure. The designations of the style of the individual conductors used in making up the cable assembly shall be available.

Assembly	For conductor - A barrier layer, if employed, may be a fibrous assembly wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic tape wrap.

Shield	Optional.

Jacket	Extruded FEP. Dia. of cable 0.425 in. or less, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment.