UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10229
                        
                            Issued:1995-03-10
                    
                            Revised:2012-04-09
                    
                            Style
                            10229
                        
                            Single conductor with extruded insulation.
                    
			Rating80 deg C, voltage not specified, Cable flame.
		
			ConductorInner - 30 AWG consisting of 7 strands of 0.10 mm, tinned or bare copper. Outer conductor - Braided copper tinned or bare, AWG not specified.
		
			InsulationInner - Extruded PE, 11 mils min average, 10 mils minimum at any point. Middle - Extruded PVC, 9 mils min average 7 mils min at any point. Outer - Extruded PVC, 9 mils min average 7 mils min at any point.
		
			AssemblyAn inner conductor with inner insulation, optional inner shield, middle insulation, outer conductors, outer insulation, optional outer shield and overall jacket.
		
			ShieldInner and outer shield are optional.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10229	Issued:1995-03-10
			Revised:2012-04-09


Rating	80 deg C, voltage not specified, Cable flame.

Conductor	Inner - 30 AWG consisting of 7 strands of 0.10 mm, tinned or bare copper. Outer conductor - Braided copper tinned or bare, AWG not specified.

Insulation	Inner - Extruded PE, 11 mils min average, 10 mils minimum at any point. Middle - Extruded PVC, 9 mils min average 7 mils min at any point. Outer - Extruded PVC, 9 mils min average 7 mils min at any point.

Assembly	An inner conductor with inner insulation, optional inner shield, middle insulation, outer conductors, outer insulation, optional outer shield and overall jacket.

Shield	Inner and outer shield are optional.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.