UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10231
                        
                            Issued:1995-03-21
                    
                            Revised:2013-08-08
                    
                            Style
                            10231
                        
                            Single conductor with extruded insulation and covering
                    
			Rating90 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG - 22 AWG, material not specified.
		
			InsulationExtruded ETFE, extruded FEP or extruded PFA, 1.4 mils minimum average thickness, 1.2 mils minimum thickness at any point.
		
			ShieldOptional.
		
			CoveringOptional. (1) Extruded PFA, extruded FEP or extruded ETFE, 1.0 mil minimum at any point; or (2) Spirally wrapped with minimum 0.2 mil thick PETP tape using PVC or polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or as insulated single in jacketed multi-conductor cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10231	Issued:1995-03-21
			Revised:2013-08-08


Rating	90 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG - 22 AWG, material not specified.

Insulation	Extruded ETFE, extruded FEP or extruded PFA, 1.4 mils minimum average thickness, 1.2 mils minimum thickness at any point.

Shield	Optional.

Covering	Optional. (1) Extruded PFA, extruded FEP or extruded ETFE, 1.0 mil minimum at any point; or (2) Spirally wrapped with minimum 0.2 mil thick PETP tape using PVC or polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or as insulated single in jacketed multi-conductor cables.