UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10245
                        
                            Issued:1995-08-09
                    
                            Revised:2012-03-21
                    
                            Style
                            10245
                        
                            Single-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min.
		
			InsulationExtruded PFA, extruded FEP, extruded PTFE, extruded ETFE or combination thereof, 2 mils min at any point, 125 mils max.
		
			CoveringOptional. Extruded PVC, extruded PFA, or non-extruded Polyester film, Thickness not specified.
		
			ShieldOptional, required if outer shield is not provided.
		
			CoveringOptional. Extruded PVC, extruded PFA, non-extruded heat sealed PVC tape, extruded Nylon (Polyamide), extruded Polyester, extruded PVDF, extruded FEP, extruded PTFE, extruded ETFE, or non-extruded Polyester film. Thicknesses not specified.
		
			Outer ShieldOptional, if inner shield is not provided.
		
			Outer CoveringOptional, required if outer shield is provided. Extruded PVC, extruded PFA, non-extruded heat sealed PVC tape, extruded Nylon (Polyamide), extruded Polyester, extruded PVDF, extruded FEP, extruded PTFE, extruded ETFE, or non-extruded Polyester film. Thicknesses not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 Circuits of Electronic Equipment or as insulated single in jacketed multiconductor cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10245	Issued:1995-08-09
			Revised:2012-03-21


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min.

Insulation	Extruded PFA, extruded FEP, extruded PTFE, extruded ETFE or combination thereof, 2 mils min at any point, 125 mils max.

Covering	Optional. Extruded PVC, extruded PFA, or non-extruded Polyester film, Thickness not specified.

Shield	Optional, required if outer shield is not provided.

Covering	Optional. Extruded PVC, extruded PFA, non-extruded heat sealed PVC tape, extruded Nylon (Polyamide), extruded Polyester, extruded PVDF, extruded FEP, extruded PTFE, extruded ETFE, or non-extruded Polyester film. Thicknesses not specified.

Outer Shield	Optional, if inner shield is not provided.

Outer Covering	Optional, required if outer shield is provided. Extruded PVC, extruded PFA, non-extruded heat sealed PVC tape, extruded Nylon (Polyamide), extruded Polyester, extruded PVDF, extruded FEP, extruded PTFE, extruded ETFE, or non-extruded Polyester film. Thicknesses not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 Circuits of Electronic Equipment or as insulated single in jacketed multiconductor cables.