UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10250
                        
                            Issued:1995-08-23
                    
                            Revised:2012-03-30
                    
                            Style
                            10250
                        
                            Single Conductor with Extruded Insulation
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG min. Material and stranding not specified.
		
			InsulationExtruded Solid or foamed FEP, 2 mils minimum average thickness, 1 mils minimum thickness at any point, 100 mils maximum thickness.
		
			AssemblyInsulated conductor with optional inner covering, optional inner shield, optional jacket, optional outer shield and optional outer covering.
		
			ShieldInner and outer shield are optional.
		
			CoveringInner - (Optional) Extruded PBT, PTFE, FEP, ETFE, PVC or PFA, 2 mils minimum thickness at any point, or PETP with a PVC or polyester adhesive (Milene) or combination thereof, 2 mils minimum wall thickness at any point or 0.5 mils minimum thickness PET tape with PVC adhesive, or foamed PTFE tape, 0.5 mils minimum thickness. 

Outer - (Optional) same as inner covering.
		
			JacketJacket - (Optional)Same as covering.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10250	Issued:1995-08-23
			Revised:2012-03-30


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG min. Material and stranding not specified.

Insulation	Extruded Solid or foamed FEP, 2 mils minimum average thickness, 1 mils minimum thickness at any point, 100 mils maximum thickness.

Assembly	Insulated conductor with optional inner covering, optional inner shield, optional jacket, optional outer shield and optional outer covering.

Shield	Inner and outer shield are optional.

Covering	Inner - (Optional) Extruded PBT, PTFE, FEP, ETFE, PVC or PFA, 2 mils minimum thickness at any point, or PETP with a PVC or polyester adhesive (Milene) or combination thereof, 2 mils minimum wall thickness at any point or 0.5 mils minimum thickness PET tape with PVC adhesive, or foamed PTFE tape, 0.5 mils minimum thickness. Outer - (Optional) same as inner covering.

Jacket	Jacket - (Optional)Same as covering.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in electronic equipment.