UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10251
                        
                            Issued:1995-08-23
                    
                            Revised:2012-08-22
                    
                            Style
                            10251
                        
                            Single Conductor with Other-Than-Extruded Insulation
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor42 AWG min.
		
			InsulationNon-extruded solid or cellular FEP, with a PVC, or polyester adhesive, or combination thereof.  Minimum wall thickness at any point 1 mil.

			AssemblyInsulated conductor with optional inner covering, optional inner shield, optional middle covering, optional outer shield and optional outer covering.
		
			ShieldInner and outer are optional.
		
			CoveringInner, middle and outer coverings are optional and the same material. Extruded PBT, PTFE, FEP, ETFE, PVC or PFA with 2 mils minimum thickness at any point, or PETP with a PVC or polyester adhesive (Milene) or combination thereof, minimum wall thickness at any point 2 mils or 0.5 mils minimum thickness PETP tape with PVC adhesive, or 0.5 mils minimum thickness cellular PTFE tape.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10251	Issued:1995-08-23
			Revised:2012-08-22


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	42 AWG min.

Insulation	Non-extruded solid or cellular FEP, with a PVC, or polyester adhesive, or combination thereof. Minimum wall thickness at any point 1 mil.

Assembly	Insulated conductor with optional inner covering, optional inner shield, optional middle covering, optional outer shield and optional outer covering.

Shield	Inner and outer are optional.

Covering	Inner, middle and outer coverings are optional and the same material. Extruded PBT, PTFE, FEP, ETFE, PVC or PFA with 2 mils minimum thickness at any point, or PETP with a PVC or polyester adhesive (Milene) or combination thereof, minimum wall thickness at any point 2 mils or 0.5 mils minimum thickness PETP tape with PVC adhesive, or 0.5 mils minimum thickness cellular PTFE tape.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.