UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10293
                        
                            Issued:1996-12-30
                    
                            Revised:2012-04-25
                    
                            Style
                            10293
                        
                            Single conductor with extruded insulation
                    
			Rating200 deg C, 10000 Vac, Horizontal flame.
		
			Conductor24 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded ETFE, applied in two layers; 14 mils minimum average thickness, 12 mils minimum thickness at any point. See Facing Page for compound designation. The thinnest layer of the two shall not be less than 4 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseRangetop gas appliance ignition systems, where not exposed to moisture and where protected from damage during handling, installation and servicing of the appliance, where the acceptability of the combination is to be determined by Underwriters Laboratories.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10293	Issued:1996-12-30
			Revised:2012-04-25


Rating	200 deg C, 10000 Vac, Horizontal flame.

Conductor	24 AWG - 10 AWG, solid or stranded.

Insulation	Extruded ETFE, applied in two layers; 14 mils minimum average thickness, 12 mils minimum thickness at any point. See Facing Page for compound designation. The thinnest layer of the two shall not be less than 4 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Rangetop gas appliance ignition systems, where not exposed to moisture and where protected from damage during handling, installation and servicing of the appliance, where the acceptability of the combination is to be determined by Underwriters Laboratories.