UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10298
                        
                            Issued:1997-02-20
                    
                            Revised:2012-04-25
                    
                            Style
                            10298
                        
                            Single conductor with extruded or other-than-extruded insulation.
                    
			Rating60 or 80 deg C, 30 Vac.
		
			Conductor44 AWG minimum, solid or stranded.
		
			InsulationExtruded PE, extruded foamed PE, extruded XLPE, extruded foamed XLPE, extruded FRPE, extruded foamed FRPE, extruded XLFRPE, extruded foamed XLFRPE, extruded PP, extruded foamed PP, extruded XLPP, extruded foamed XLPP, extruded PFA, extruded foamed PFA, extruded XLPFA, extruded foamed XLPFA, extruded FEP, extruded foamed FEP, extruded XLFEP, extruded foamed XLFEP, extruded ECTFE, extruded foamed ECTFE, extruded XLECTFE, extruded foamed XLECTFE, extruded PTFE, extruded foamed PTFE, extruded XLPTFE, extruded foamed XLPTFE, extruded ETFE, extruded foamed ETFE, extruded XLETFE, extruded foamed XLETFE, or combination thereof, 2 mils min at any point, 125 mils max. 
The insulation may be taped wrapped non-extruded PTFE or non-extruded foamed PTFE applied directly over the conductor, or applied as a spiral wrapped non-extruded PE thread (5 mils min, 40 mils max) and enclosed with "tubed on" insulation.
		
			CoveringOptional. Extruded PVC, extruded Nylon (polyamide), extruded polyester, extruded PE, extruded FRPE, extruded PP or extruded ETFE, approximately 2 mils thick, or non-extruded lacquered braid.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor further processing: As insulated singles in internal or external jacketed cables for electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10298	Issued:1997-02-20
			Revised:2012-04-25


Rating	60 or 80 deg C, 30 Vac.

Conductor	44 AWG minimum, solid or stranded.

Insulation	Extruded PE, extruded foamed PE, extruded XLPE, extruded foamed XLPE, extruded FRPE, extruded foamed FRPE, extruded XLFRPE, extruded foamed XLFRPE, extruded PP, extruded foamed PP, extruded XLPP, extruded foamed XLPP, extruded PFA, extruded foamed PFA, extruded XLPFA, extruded foamed XLPFA, extruded FEP, extruded foamed FEP, extruded XLFEP, extruded foamed XLFEP, extruded ECTFE, extruded foamed ECTFE, extruded XLECTFE, extruded foamed XLECTFE, extruded PTFE, extruded foamed PTFE, extruded XLPTFE, extruded foamed XLPTFE, extruded ETFE, extruded foamed ETFE, extruded XLETFE, extruded foamed XLETFE, or combination thereof, 2 mils min at any point, 125 mils max. The insulation may be taped wrapped non-extruded PTFE or non-extruded foamed PTFE applied directly over the conductor, or applied as a spiral wrapped non-extruded PE thread (5 mils min, 40 mils max) and enclosed with "tubed on" insulation.

Covering	Optional. Extruded PVC, extruded Nylon (polyamide), extruded polyester, extruded PE, extruded FRPE, extruded PP or extruded ETFE, approximately 2 mils thick, or non-extruded lacquered braid.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For further processing: As insulated singles in internal or external jacketed cables for electronic equipment.