UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10313
                        
                            Issued:1997-09-10
                    
                            Revised:2020-01-13
                    
                            Style
                            10313
                        
                            Single Conductor with Extruded Insulation
                    
			Rating200 deg C, 600 Vac, Horizontal Flame, Oil Res 80 deg C (optional), Gasoline Res (optional)
		
			ConductorNo. 50-14 AWG, solid or stranded. Solid magnet wire or Litz cable magnet wire, R/C (OBMW2), magnet wire, rated at minimum 150°C.  Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor.  AWG size to be determined by the DC Resistance Test.
		
			InsulationExtruded FEP or PFA. May be extruded in one layer with 9 mils minimum average thickness, 8 mils minimum thickness at any point.  May be extruded in two layers, each layer with 4.5 mils minimum average thickness or in three layers, each layer with 3 mils minimum average thickness.
		
			AssemblyEach single magnet wire strand is cabled together with other magnet wire strands to form a conductor.
		
			ShieldOptional.
		
			CoveringOptional. Extruded FEP or PFA, 5 mils minimum thickness or PTFE (extruded or tape wrapped) 5 mils minimum thickness or thicker.
		
			BraidOptional. Silicone impregnated glass braid, 15 mil sminimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. For Litz conductors shall be marked as follows: "Litz conductors are manufactured using solderable magnet wire."
		
			UseInternal Wiring of Appliances. In addition the tag may also indicate the following: 600 V Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10313	Issued:1997-09-10
			Revised:2020-01-13


Rating	200 deg C, 600 Vac, Horizontal Flame, Oil Res 80 deg C (optional), Gasoline Res (optional)

Conductor	No. 50-14 AWG, solid or stranded. Solid magnet wire or Litz cable magnet wire, R/C (OBMW2), magnet wire, rated at minimum 150°C. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor. AWG size to be determined by the DC Resistance Test.

Insulation	Extruded FEP or PFA. May be extruded in one layer with 9 mils minimum average thickness, 8 mils minimum thickness at any point. May be extruded in two layers, each layer with 4.5 mils minimum average thickness or in three layers, each layer with 3 mils minimum average thickness.

Assembly	Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor.

Shield	Optional.

Covering	Optional. Extruded FEP or PFA, 5 mils minimum thickness or PTFE (extruded or tape wrapped) 5 mils minimum thickness or thicker.

Braid	Optional. Silicone impregnated glass braid, 15 mil sminimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General. For Litz conductors shall be marked as follows: "Litz conductors are manufactured using solderable magnet wire."

Use	Internal Wiring of Appliances. In addition the tag may also indicate the following: 600 V Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."