UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10331
                        
                            Issued:1997-11-19
                    
                            Revised:2012-07-09
                    
                            Style
                            10331
                        
                            Single Conductor with Extruded Insulation.
                    
			Rating150, 200 deg C, 300 Vac, Oil Resistant 80 deg C (optional), Gasoline Res (optional)
		
			Conductor36 AWG - 10 AWG solid or stranded, or Litz cable magnet wire. AWG size to be determined by the DC Resistance Test.
		
			InsulationExtruded FEP, 8 mils min average, 7 mils minimum at any point.
		
			AssemblyLitz cable conductor consists of single strand magnet wire, R/C (OBMW2) magnet wire. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor.
		
			CoveringOptional. Extruded FEP, 10 mils or heavier or glass braid 7 mils or heavier.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire".
		
			UseFor further processing in cables for electronic equipment or appliances. In addition, the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; 80 deg. C in oil; and or 600 Volts Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10331	Issued:1997-11-19
			Revised:2012-07-09


Rating	150, 200 deg C, 300 Vac, Oil Resistant 80 deg C (optional), Gasoline Res (optional)

Conductor	36 AWG - 10 AWG solid or stranded, or Litz cable magnet wire. AWG size to be determined by the DC Resistance Test.

Insulation	Extruded FEP, 8 mils min average, 7 mils minimum at any point.

Assembly	Litz cable conductor consists of single strand magnet wire, R/C (OBMW2) magnet wire. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor.

Covering	Optional. Extruded FEP, 10 mils or heavier or glass braid 7 mils or heavier.

Standard	Appliance Wiring Material UL 758.

Marking	General. Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire".

Use	For further processing in cables for electronic equipment or appliances. In addition, the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; 80 deg. C in oil; and or 600 Volts Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire".