UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10354
                        
                            Issued:1998-06-16
                    
                            Revised:2012-04-09
                    
                            Style
                            10354
                        
                            Single-conductor wire using non-integral jacket.
                    
			Rating150 deg C, 2000 Vac, Horizontal flame.
		
			Conductor20 AWG - 8 AWG, solid or stranded.
		
			InsulationExtruded FEP.  Applied in two layers with the inner layer 30 mils minimum thickness at any point and outer layer 50 mils minimum thickness at any point.  Or a single layer having a 80 mils minimum thickness at any point.
		
			ShieldOptional - Tinned or bare copper braid.
		
			JacketExtruded ETFE, 28 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10354	Issued:1998-06-16
			Revised:2012-04-09


Rating	150 deg C, 2000 Vac, Horizontal flame.

Conductor	20 AWG - 8 AWG, solid or stranded.

Insulation	Extruded FEP. Applied in two layers with the inner layer 30 mils minimum thickness at any point and outer layer 50 mils minimum thickness at any point. Or a single layer having a 80 mils minimum thickness at any point.

Shield	Optional - Tinned or bare copper braid.

Jacket	Extruded ETFE, 28 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.