UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10357
                        
                            Issued:1998-06-30
                    
                            Revised:2012-08-24
                    
                            Style
                            10357
                        
                            Single conductor with extruded insulation.
                    
			Rating90 deg C, 125 Vac, Horizontal flame.
		
			ConductorConductor - Copper, nickel-alloy, or stainless steel conductor, 39 - 31 AWG, wound 10 turns per inch min, 70 turns per inch max, on a core of Acrylic, Fiberglass, Polyester or Rayon.  Core may be coated with Silicone Rubber.
  
Sensor Wire - Copper, nickel-alloy, or stainless steel conductor, 40 - 35 AWG, wound 10 turns per inch min, 70 turns per inch max.
		
			CoveringProvided over conductor. Extruded PVC or extruded PE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			InsulationExtruded PVC, 18 mils minimum average thickness, 15 mils minimum thickness at any point.
		
			AssemblyConductor enclosed by Covering.  Sensor Wire provided over the Covering.  Insulation provided over the Sensor Wire.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of heated pads where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10357	Issued:1998-06-30
			Revised:2012-08-24


Rating	90 deg C, 125 Vac, Horizontal flame.

Conductor	Conductor - Copper, nickel-alloy, or stainless steel conductor, 39 - 31 AWG, wound 10 turns per inch min, 70 turns per inch max, on a core of Acrylic, Fiberglass, Polyester or Rayon. Core may be coated with Silicone Rubber. Sensor Wire - Copper, nickel-alloy, or stainless steel conductor, 40 - 35 AWG, wound 10 turns per inch min, 70 turns per inch max.

Covering	Provided over conductor. Extruded PVC or extruded PE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Insulation	Extruded PVC, 18 mils minimum average thickness, 15 mils minimum thickness at any point.

Assembly	Conductor enclosed by Covering. Sensor Wire provided over the Covering. Insulation provided over the Sensor Wire.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of heated pads where the acceptability of the combination has been determined by Underwriters Laboratories Inc.