UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10390
                        
                            Issued:1999-01-20
                    
                            Revised:2013-03-14
                    
                            Style
                            10390
                        
                            Single conductor with extruded insulation
                    
			Rating80 deg C, 600 Vac.
		
			Conductor36 AWG - 4/0 AWG solid or stranded or R/C  Magnet Wire (OBMW2)each single magnet wire strand is cabled or braided together with the other magnet wire strands to form a conductor.   The AWG size to be determined by the DC Resistance Test.
		
			InsulationExtruded TPES
		
			36-12 AWG conductor size10 mils min average9 mils minimum at any point
		
			10 AWG15 avg13 min
		
			8-6 AWG20 avg18 min
		
			4-2 AWG30 avg27 min
		
			1-4/0 AWG40 avg36 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.  If the Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum____________ohm/feet at ______________C)
		
			UseFor further processing in Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10390	Issued:1999-01-20
			Revised:2013-03-14


Rating	80 deg C, 600 Vac.

Conductor	36 AWG - 4/0 AWG solid or stranded or R/C Magnet Wire (OBMW2)each single magnet wire strand is cabled or braided together with the other magnet wire strands to form a conductor. The AWG size to be determined by the DC Resistance Test.

Insulation	Extruded TPES
	36-12 AWG conductor size	10 mils min average	9 mils minimum at any point
	10 AWG	15 avg	13 min
	8-6 AWG	20 avg	18 min
	4-2 AWG	30 avg	27 min
	1-4/0 AWG	40 avg	36 min

Standard	Appliance Wiring Material UL 758.

Marking	General. If the Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum____________ohm/feet at ______________C)

Use	For further processing in Cables.