UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10425
                        
                            Issued:1999-06-24
                    
                            Revised:2012-03-16
                    
                            Style
                            10425
                        
                            Single-Conductor Cable Using Extruded Non-Integral Jacket and Covering
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 10 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded Solid or cellular FRPE
		
			AWG Conductor Size¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			30-161513
		
			15-102018
		
			Barrier TapeOptional Polyester tape.
		
			AssemblyInsulated conductor with optional barrier tape, optional inner shield, optional inner covering, optional outer shield, jacket and outer covering.
		
			ShieldInner and outer shield are Optional.
		
			Covering(Optional) Inner -  A textile braid, nylon jacket (2 mils minimum covering thickness), or 8 mils minimum thickness of semi-rigid or regular PVC may be applied between the insulation and shield. (Required) Outer - Nylon - 2 mils minimum thickness at any point.
		
			JacketPVC, 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10425	Issued:1999-06-24
			Revised:2012-03-16


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 10 AWG solid or stranded round, tinned or bare.

Insulation	Extruded Solid or cellular FRPE
	AWG Conductor Size¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	30-16	15	13
	15-10	20	18

Barrier Tape	Optional Polyester tape.

Assembly	Insulated conductor with optional barrier tape, optional inner shield, optional inner covering, optional outer shield, jacket and outer covering.

Shield	Inner and outer shield are Optional.

Covering	(Optional) Inner - A textile braid, nylon jacket (2 mils minimum covering thickness), or 8 mils minimum thickness of semi-rigid or regular PVC may be applied between the insulation and shield. (Required) Outer - Nylon - 2 mils minimum thickness at any point.

Jacket	PVC, 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.