UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10456
                        
                            Issued:1999-10-29
                    
                            Revised:2013-09-05
                    
                            Style
                            10456
                        
                            Single-conductor cable using non-integral Jacket.
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			Conductor30 AWG min., solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			ShieldOptional.
		
			CoveringOptional. A barrier layer if employed, may be a fibrous wrap, serving or braid; Paper; Nylon: oriented Polyethylene terephthalate; or a thermoplastic tape wrap or 4 mils or heavier thermoplastic material covering extruded over the conductor assembly. The covering used must be suitable to the temperature rating of the cable.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			1.000 inch or less45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10456	Issued:1999-10-29
			Revised:2013-09-05


Rating	80 deg C, 600 Vac, Cable flame.

Conductor	30 AWG min., solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Shield	Optional.

Covering	Optional. A barrier layer if employed, may be a fibrous wrap, serving or braid; Paper; Nylon: oriented Polyethylene terephthalate; or a thermoplastic tape wrap or 4 mils or heavier thermoplastic material covering extruded over the conductor assembly. The covering used must be suitable to the temperature rating of the cable.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	1.000 inch or less	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.