UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10497
                        
                            Issued:2000-05-29
                    
                            Revised:2011-08-04
                    
                            Style
                            10497
                        
                            Single Conductor with Extruded Non-Integral Jacket
                    
			Rating150 deg C, 300 Vac, Horizontal flame, Optional - 80 deg C Oil
		
			InsulationLabeled or complying with manufacturer's AWM Procedure
		
			AssemblyIndividually insulated conductors. Insulated conductor with optional inner shield, option inner covering, optional outer shield and jacket. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			BarrierOptional - May be a fibrous wrap serving, or braid; paper; nylon; oriented PETP; or thermoplastic-tape wrap
		
			ShieldOptional
		
			CoveringOptional - Extruded FEP, 6 mils minimum thickness at any point
		
			JacketExtruded FEP
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less25 mils20 mils
		
			0.426-0.700 inch30 mils24 mils
		
			0.701-1.500 inch45 mils36 mils
		
			1.501-2.500 inch60 mils48 mils
		
			2.501 inch and larger80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment. Tags may indicate the following: 600 V peak - For Electronic Use Only
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10497	Issued:2000-05-29
			Revised:2011-08-04


Rating	150 deg C, 300 Vac, Horizontal flame, Optional - 80 deg C Oil

Insulation	Labeled or complying with manufacturer's AWM Procedure

Assembly	Individually insulated conductors. Insulated conductor with optional inner shield, option inner covering, optional outer shield and jacket. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Barrier	Optional - May be a fibrous wrap serving, or braid; paper; nylon; oriented PETP; or thermoplastic-tape wrap

Shield	Optional

Covering	Optional - Extruded FEP, 6 mils minimum thickness at any point

Jacket	Extruded FEP
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	25 mils	20 mils
	0.426-0.700 inch	30 mils	24 mils
	0.701-1.500 inch	45 mils	36 mils
	1.501-2.500 inch	60 mils	48 mils
	2.501 inch and larger	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	External interconnection or internal wiring of appliances or electronic equipment. Tags may indicate the following: 600 V peak - For Electronic Use Only