UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10498
                        
                            Issued:2000-05-29
                    
                            Revised:2012-04-12
                    
                            Style
                            10498
                        
                            Single conductor with extruded insulation and jacket
                    
			Rating75 deg C, 600 Vac, Horizontal flame and Cable Flame Test.
		
			Conductor30 AWG - 4/0 AWG.
		
			InsulationAny labeled single with temperature rating equaling or exceeding temperature rating of the cable.
		
			AssemblySingle conductor. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier FRPE covering may be extruded over conductor assembly.
		
			JacketFRPE.
		
			Diameter of core assembly under jacket(inches)Minimum average thickness(mils)minimum thickness at any point(mils)
		
			0.700 or less3024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			1.501 - 2.5008064
		
			2.501 and larger9072
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10498	Issued:2000-05-29
			Revised:2012-04-12


Rating	75 deg C, 600 Vac, Horizontal flame and Cable Flame Test.

Conductor	30 AWG - 4/0 AWG.

Insulation	Any labeled single with temperature rating equaling or exceeding temperature rating of the cable.

Assembly	Single conductor. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. A 6 mil or heavier FRPE covering may be extruded over conductor assembly.

Jacket	FRPE.
	Diameter of core assembly under jacket(inches)	Minimum average thickness(mils)	minimum thickness at any point(mils)
	0.700 or less	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48
	1.501 - 2.500	80	64
	2.501 and larger	90	72

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances and external interconnection of electronic equipment.