UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10509
                        
                            Issued:2000-08-08
                    
                            Revised:2011-11-10
                    
                            Style
                            10509
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame, internal use; Cable flame, external use.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			CoveringOptional. A 10 mils or heavier THV covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded THV.
		
			Internal UseExternal Use
		
			*Diameter of core assembly under jacketMinimum average thicknessMinimum thicknes ar any pointMinimum average thicknessMinimum thicknes ar any point
		
			0.700 inch or less10 mils8 mils30 mils24  mils
		
			0.701-1.000 inch10 mils8 mils45 mils36 mils
		
			1.001-1.500 inch10 mils8 mils60 mils48 mils
		
			* Major diamter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10509	Issued:2000-08-08
			Revised:2011-11-10


Rating	80 deg C, 300 Vac, Horizontal flame, internal use; Cable flame, external use.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Covering	Optional. A 10 mils or heavier THV covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded THV.
		Internal Use		External Use
	*Diameter of core assembly under jacket	Minimum average thickness	Minimum thicknes ar any point	Minimum average thickness	Minimum thicknes ar any point
	0.700 inch or less	10 mils	8 mils	30 mils	24 mils
	0.701-1.000 inch	10 mils	8 mils	45 mils	36 mils
	1.001-1.500 inch	10 mils	8 mils	60 mils	48 mils
	* Major diamter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.