UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10515
                        
                            Issued:2000-09-06
                    
                            Revised:2011-08-12
                    
                            Style
                            10515
                        
                            Single conductor with extruded insulation using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, Copper or Copper Alloy.
		
			InsulationExtruded PE or Extruded FRPE, 23 mils min average, 20 mils minimum at any point.
		
			AssemblyInsulated conductor with optional covering, inner shield, jacket, optional outer shield and optional outer jacket.
		
			Inner CoveringOptional. Extruded PVC, Extruded Nylon, or Extruded Polyester, 2 mils minimum, or lacquered braid.
		
			ShieldRequired, Inner.
		
			JacketExtruded XLPE - 15 mils min average, 12 mils min at any point.
		
			ShieldOptional, provided over inner jacket.
		
			JacketOptional, Outer.  Extruded PVC - 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10515	Issued:2000-09-06
			Revised:2011-08-12


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG solid or stranded round, Copper or Copper Alloy.

Insulation	Extruded PE or Extruded FRPE, 23 mils min average, 20 mils minimum at any point.

Assembly	Insulated conductor with optional covering, inner shield, jacket, optional outer shield and optional outer jacket.

Inner Covering	Optional. Extruded PVC, Extruded Nylon, or Extruded Polyester, 2 mils minimum, or lacquered braid.

Shield	Required, Inner.

Jacket	Extruded XLPE - 15 mils min average, 12 mils min at any point.

Shield	Optional, provided over inner jacket.

Jacket	Optional, Outer. Extruded PVC - 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electronic Equipment.