UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10545
                        
                            Issued:2001-03-29
                    
                            Revised:2019-11-07
                    
                            Style
                            10545
                        
                            Single conductor cable using non-integral jacket.
                    
			Rating80 deg C, voltage rating not specified, Cable flame.
		
			Conductor36 AWG min., solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyFillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the individual conductor.
		
			ShieldOptional.
		
			CoveringOptional. A 4 mil or heavier wall of thermoplastic covering may be extruded over the conductor with or without shields).
		
			JacketPUR
		
			dia in inches
		
			0.425 or less45 mils min average36 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dai and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring or external interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10545	Issued:2001-03-29
			Revised:2019-11-07


Rating	80 deg C, voltage rating not specified, Cable flame.

Conductor	36 AWG min., solid or stranded round, tinned or bare copper.

Insulation	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the individual conductor.

Shield	Optional.

Covering	Optional. A 4 mil or heavier wall of thermoplastic covering may be extruded over the conductor with or without shields).

Jacket	PUR
	dia in inches
	0.425 or less	45 mils min average	36 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dai and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring or external interconnection.