UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10578
                        
                            Issued:2001-08-13
                    
                            Revised:2011-07-28
                    
                            Style
                            10578
                        
                            Single conductor with extruded insulation.
                    
			Rating80 deg C, 300 Vac.
		
			Conductor30 AWG - 10 AWG solid or stranded round.
		
			InsulationExtruded PE, extruded foamed PE, extruded FRPE or extruded foamed FRPE
		
			Conductor size AWGMinimum average thicknessMinimum thickness at any point
		
			30-1615 mils13 mils
		
			15-1020 mils18 mils
		
			Barrier LayerOptional - Polyester tape over conductor.
		
			AssemblyInsulated conductor with optional barrier tape, optional inner shield, optional inner covering, optional middle shield, optional outer covering and optional outer shield.
		
			ShieldOptional
		
			CoveringInner: Optional - A textile braid; extruded nylon jacket, 2 mil minimum thickness; or extruded PVC, 8 mils minimum thickness; or extruded SRPVC, 8 mils minimum thickness; may be applied between the insulation and shield. 

			ShieldOptional
		
			CoveringOuter: Optional - Extruded PVC, PI, Polyester, PE, FRPE, PP or EFTE, 2 mils minimum thickness, or a lacquered braid.
		
			ShieldOptional
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10578	Issued:2001-08-13
			Revised:2011-07-28


Rating	80 deg C, 300 Vac.

Conductor	30 AWG - 10 AWG solid or stranded round.

Insulation	Extruded PE, extruded foamed PE, extruded FRPE or extruded foamed FRPE
	Conductor size AWG	Minimum average thickness	Minimum thickness at any point
	30-16	15 mils	13 mils
	15-10	20 mils	18 mils

Barrier Layer	Optional - Polyester tape over conductor.

Assembly	Insulated conductor with optional barrier tape, optional inner shield, optional inner covering, optional middle shield, optional outer covering and optional outer shield.

Shield	Optional

Covering	Inner: Optional - A textile braid; extruded nylon jacket, 2 mil minimum thickness; or extruded PVC, 8 mils minimum thickness; or extruded SRPVC, 8 mils minimum thickness; may be applied between the insulation and shield.

Shield	Optional

Covering	Outer: Optional - Extruded PVC, PI, Polyester, PE, FRPE, PP or EFTE, 2 mils minimum thickness, or a lacquered braid.

Shield	Optional

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing.