UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10594
                        
                            Issued:2001-11-30
                    
                            Revised:2012-03-13
                    
                            Style
                            10594
                        
                            Single conductor with extruded insulation
                    
			Rating90 deg C, 150 Vac, Horizontal flame.
		
			Conductor40 - 34 AWG. Solid conductor spirally wound over a fiber core, 60 - 15 turns per inch.
		
			Sensor LayerExtruded PE. 14 mil minimum average thickness, 12 mils minimum thickness at any point.  Not Evaluated as a Sensor Layer.
		
			Seonsor Conductor41 - 34 AWG. Solid conductor spirally wound over Sensor Layer, 70 - 10 turns per inch.

			InsulationExtruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.  High Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10594	Issued:2001-11-30
			Revised:2012-03-13


Rating	90 deg C, 150 Vac, Horizontal flame.

Conductor	40 - 34 AWG. Solid conductor spirally wound over a fiber core, 60 - 15 turns per inch.

Sensor Layer	Extruded PE. 14 mil minimum average thickness, 12 mils minimum thickness at any point. Not Evaluated as a Sensor Layer.

Seonsor Conductor	41 - 34 AWG. Solid conductor spirally wound over Sensor Layer, 70 - 10 turns per inch.

Insulation	Extruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring. High Resistance Heater Wire.