UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10600
                        
                            Issued:2002-01-22
                    
                            Revised:2011-10-19
                    
                            Style
                            10600
                        
                            Single-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 120 Vac, 240 Vac, 300 Vac, Cable flame, 75 deg C wet.
		
			Conductor20 AWG - 14 AWG, stranded.
		
			Conductive CoreOver the conductor is an extruded carbon-loaded (radiation cross-linked) polyolefin, thickness not specified.
		
			BraidNickel-Copper 90% coverage.
		
			CoveringOptional. modified polyurethane, polyester or thermoplastic elastomer, 12 mils minimum at any point.
		
			InsulationExtruded HDPE, 18 mils minimum average, 16 mils minimum at any point.
		
			ShieldTinned or Nickel-Copper 85% coverage.
		
			JacketExtruded ETFE or TPE, 13 mils minimum average, 11 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe-Heating Conductor.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10600	Issued:2002-01-22
			Revised:2011-10-19


Rating	80 deg C, 120 Vac, 240 Vac, 300 Vac, Cable flame, 75 deg C wet.

Conductor	20 AWG - 14 AWG, stranded.

Conductive Core	Over the conductor is an extruded carbon-loaded (radiation cross-linked) polyolefin, thickness not specified.

Braid	Nickel-Copper 90% coverage.

Covering	Optional. modified polyurethane, polyester or thermoplastic elastomer, 12 mils minimum at any point.

Insulation	Extruded HDPE, 18 mils minimum average, 16 mils minimum at any point.

Shield	Tinned or Nickel-Copper 85% coverage.

Jacket	Extruded ETFE or TPE, 13 mils minimum average, 11 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe-Heating Conductor.