UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10618
                        
                            Issued:2002-05-02
                    
                            Revised:2011-10-10
                    
                            Style
                            10618
                        
                            Single conductor cable using extruded non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Horozontal flame, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with AWM Procedure.
		
			AssemblyInsulated conductor with optional filler, optional tape, optional covering, optional shield and jacket.
		
			FillersOptional. Single or mixed of ETFE, PFA, FEP, or Cellular PTFE.
		
			BinderOptional. ETFE, PFA, FEP, or Cellular PTFE tape over fillers.
		
			CoveringOptional. Extruded PFA or extruded FEP, 10 mils minimum thickness, or extruded ETFE, 15 mils minimum thickness.
		
			ShieldOptional.
		
			JacketExtruded FEP.
		
			Diameter of cable under jacketMinimum averageMinimum at any point
		
			0.350 inch or less10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10618	Issued:2002-05-02
			Revised:2011-10-10


Rating	150 deg C, 600 Vac, Horozontal flame, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with AWM Procedure.

Assembly	Insulated conductor with optional filler, optional tape, optional covering, optional shield and jacket.

Fillers	Optional. Single or mixed of ETFE, PFA, FEP, or Cellular PTFE.

Binder	Optional. ETFE, PFA, FEP, or Cellular PTFE tape over fillers.

Covering	Optional. Extruded PFA or extruded FEP, 10 mils minimum thickness, or extruded ETFE, 15 mils minimum thickness.

Shield	Optional.

Jacket	Extruded FEP.
	Diameter of cable under jacket	Minimum average	Minimum at any point
	0.350 inch or less	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.