UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10619
                        
                            Issued:2002-05-02
                    
                            Revised:2012-03-13
                    
                            Style
                            10619
                        
                            Single conductor with extruded insulation.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyInsulated conductor with optional filler, optional tape, optional covering, optional shield and jacket.
		
			FillerOptional. Single or mixed fillers consisting of ETFE, PFA, FEP, or Cellular PTFE.
		
			TapeOptional. ETFE, PFA, FEP, or Cellular PTFE.
		
			CoveringOptional. Extruded PFA or FEP, 10 mils minimum thicness at any point, or Extruded ETFE, 15 mils minimum thickness at any point. Covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded ETFE.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10619	Issued:2002-05-02
			Revised:2012-03-13


Rating	150 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Insulated conductor with optional filler, optional tape, optional covering, optional shield and jacket.

Filler	Optional. Single or mixed fillers consisting of ETFE, PFA, FEP, or Cellular PTFE.

Tape	Optional. ETFE, PFA, FEP, or Cellular PTFE.

Covering	Optional. Extruded PFA or FEP, 10 mils minimum thicness at any point, or Extruded ETFE, 15 mils minimum thickness at any point. Covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded ETFE.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.